Home About Us Products Project Reference Article FAQ Job Opportunities Contact Us
   
 
OUR PRODUCTS
SACRIFICIAL ANODES
ALUMINIUM ANODE
ZINC ANODE
CONCRETE ANODE
IMPRESSED CURRENT
ANTIFOULING SYSTEM
ELECTROLYTIC SYSTEM
ULTRASONIC PULSE SYSTEM
RUST BULLET PAINT
KEY FACT
TESTING CERTIFICATES
APPLICATION GUIDELINE
SAFETY DATA SHEET
ENGINEERING DATA SHEET
HOW TO WORKS
CUSTOMER REFERENCE

Rust Bullet Paint

Rust Bullet® Coatings
Engineering Data Sheet


Rust Bullet® Standard, Rust Bullet® Automotive, ColorShell™, BlackShell®, WhiteShell™, Clear Shot™
  • Weight per gallon: 9.0 – 9.2 lbs.
  • Pigment type: Aluminum
  • Color/Finish: Metallic Gray
  • Flash Point: 123°F
  • Volatile Organic Content (VOC): 277 g./liter
  • Viscosity: 420-500 cP
  • Theoretical coverage: Approx. 350-400 ft²/ Gallon @ 3 mil/coat
  • Solids by Volume: 70% +/- 2%
  • Recommended DFT: Min. 6 mil; 12 mil for commercial, industrial or marine applications
  • Temperature Resistance: 314°F continuous,
    625oF up to 72 hours
  • Application Methods: Brush, Roll, or Airless
    Spray Equipment
  • Cure Times: Varies with relative humidity,
    temperature and thickness of film;
    • Dry-to-Recoat: 2-6 hours, up to 12;
    • Dry-to- Handle: Up to 6 hours;
    • Dry-to-Touch: Up to 6 hours;
    • Full Cure: 72 hours
  • Shelf Life: Approx. 2 years un-opened; 1 month
    for opened containers; Up to 6 months if sealed
    with Bloxygen
  • Application Temp: 35
    oF-110oF (2oC-43oC)
  • Compatibility: With most other coatings; Always
    refer to the coating manufacturers guidelines for
    application and compatibility.
  • Testing:
    • ASTM B117- Salt/Fog Spray 1000 hours
      No effect
    • ASTM D4060 - Abrasion Resistance
      14,000 Cycles
    • ASTM D4541 - Pull off Adhesion Test
      7.58 MPa (1100 psi.)

Typical Uses
High performance rust inhibitive coating to stop existing
corrosion and prevent its return. Also prevents the formation of rust and corrosion on new metal. Uses consist of mostly all metal surfaces including commercial/industrial, marine, and home and farm applications. If it is made of iron or steel, it will rust and corrode if left unprotected. Rust Bullet Standard is the
complete multi-coat system, used as the base, intermediate and top coats.

Product Description
Patented, rust inhibitive, MCU coating. Easily applies to rusted, clean, or new metal. After curing, Rust Bullet Standard leaves a super tough, protective coating film, killing existing corrosion and preventing any further moisture or oxygen from reaching the substrate. Due to its excellent UV resistance and adhesion
properties, Rust Bullet Standard requires no topcoat or
base/primer coat. Attractive metallic gray finish. Apply by brush, roller, or airless spray equipment.

Advantages

  • Easy to Apply – Ready to Use; No Messy Mixing
  • Can be Applied to Rusted, Clean or New Metal
  • Single Component
  • Excellent Resistance to Extreme Atmospheric Conditions
  • Excellent Chemical and Abrasion resistance
  • Excellent Adhesion and Flexibility
  • UV Resistant – No Top Coat Required
  • Contains No Lead, Chromates or Other Heavy Metals

Safety Information
Avoid ingestion, contact with skin or eyes. The use of all personal protective equipment such as, gloves, eye protection, clothing, appropriate NIOSH approved respirator, etc., is recommended during set up, application and clean-up. Please refer to the Safety Data Sheet for complete safety data before use, available at www.RustBullet.com. It is the applicator’s responsibility to understand these safety precautions and the work environment, to protect themselves and/or others.

Surface Preparation
Surface must be free of loose paint and rust, oil, grease, wax, moisture, chlorides and any other contaminates that may affect adhesion or performance. Methods include chemical cleaning (SSPC-SP1), tool cleaning (SSPC-SP 2 &3), high-low or combinational pressure water cleaning (SSPC-SP 12) and/or abrasive blast cleaning (SSPC-SP5). Do not use other products with Rust Bullet without consulting Rust Bullet Technical Support.

 
 
 
   

Thai Marine Protection Co., Ltd.
(TMP )

555/8 Moo12 Tambon Bangphasi Amphoe BangLen NakhonPathom 73130

Tel: +66 2 024 9007
Fax: +66 2 024 9008
Technical: +66 90 940 6690-1
email: sales@thaimp.co.th